This Guy Drills A Hole Into A Flower Pot. The Unexpected Final Result Will Save You A Ton Of Money!

This version of a do-it-yourself home candle heater is claimed to be the most efficient and simple design out there. With its adjustable base you can customize the efficiency by controlling heat loss and allowing for candle space. The fact that the heater is hanging keeps it from getting too hot and ruining adjacent surfaces. The apparatus is visually more appealing than other kinds like it, which makes it nice to use even when you have company at home.

Start by gathering your materials; a six inch clay pot, with its base, a similar five inch pot, a length of chain with an odd number of links, 14 half inch nuts, 11 half inch washers, and a foot or so of half inch threaded rod. Now, put two nuts on the end of the rod, about an inch from the end.

Place the two end links of the chain onto the rod distal to the nuts, secure the chain with one more nut on the end of the rod, and tighten the two bottom nuts by twisting in opposite directions. Next, slide a washer and the big pot onto the opposite end of the rod and push it up to the secured nuts.

Insert another washer, followed by a nut, onto the rod inside the pot. With the nut tightened, top it with a washer and the small pot. Add a washer and two more nuts, again with the nuts threaded in opposite directions so that you can fasten them against each other.

Alternate placing the rest of the washers and nuts on the rod in order to create mass for the candles to heat. Save one nut and washer for the assembly of the base, and make sure you have drilled a hole in the bottom before you slide the rest of the heater onto the rod. Hang the heater from the top chain and place candles on the tray to light, and voila, you have heat!

Please Share This With Family and Friends